Vibrating screen Standard Operating Procedures

Check before running shaker : including equipment sanitation, complete all parts of the connecting bolts , fastening, intact, check the exciter is intact, check the springs for damage , missing, broken and so on, to check whether the belt tensioner without fracture screen box , sieve for damage, check whether the debris clogging the sieve screen surface to be smooth and no damage , loose , check out chute is smooth to check whether the open- beam welding and so on, check the safety devices are safe and reliable, check the control box, communications, lighting is intact, ground protection is reliable, flexible and reliable control buttons are .

When you start : After opening shaker, standing beside the box monitoring equipment to control abnormal start immediately shut down . After the re- start inspections of each shaker normal nozzle clogging or loss, frequently observed in the motor temperature and sound , the sound of the exciter often observed to see whether the four corners of the amplitude of vibration sieve consistent phenomenon coal belt is a seamless loose or fall off, often observed dehydration sculping effect. Check the sieve into the material clogging the situation is normal .

Stop : the material on the sieve to drain after shutdown . When observed through a sieve resonance point whether the collision with other devices when the following conditions must be stopped immediately found when parking.

When endanger personal safety or equipment encountered more screen area deposit debris when cutting the poor , a large area of the screen broken , severely clogged sieve chute , swinging screen box and other serious abnormalities . Troubleshooting can restart after running shaker.