>
You are here: Home - News - Product Knowledge - > VSI vertical shaft impact crusher routine maintenance measures
VSI vertical shaft impact crusher routine maintenance measures
Date: Nov 25, 2016 Source: Hamac Machinery
Improve efficiency while ensuring production safety
1. Routine maintenance for Hamac sand maker is essential, must be regularly checked, the wear parts should be timely checked for replacement or repair . Also notice that during normal operation in order to avoid the risk of accidents, you should never open the body structure of the impact crusher.
2, During operation, while the high speed devices is running , should pay attention to safety particularly. The staff should stay away from the device, machine repairs must only be carried out after a power failure.
3, After 400 hours of working time should be added the right amount of grease. clean spindle assembly after 2000 hours of working time, after 7200 hours of working time the bearing must be replaced with new one.
4, The tension of driving triangle belt should be adjusted to ensure that the belt should be grouped matching triangle, then its length as consistent as possible in each group. They should be adjusted to the difference between the two motor current does not exceed 15A.
1. Routine maintenance for Hamac sand maker is essential, must be regularly checked, the wear parts should be timely checked for replacement or repair . Also notice that during normal operation in order to avoid the risk of accidents, you should never open the body structure of the impact crusher.
2, During operation, while the high speed devices is running , should pay attention to safety particularly. The staff should stay away from the device, machine repairs must only be carried out after a power failure.
3, After 400 hours of working time should be added the right amount of grease. clean spindle assembly after 2000 hours of working time, after 7200 hours of working time the bearing must be replaced with new one.
4, The tension of driving triangle belt should be adjusted to ensure that the belt should be grouped matching triangle, then its length as consistent as possible in each group. They should be adjusted to the difference between the two motor current does not exceed 15A.
Global Case
Previous: Application of fine crusher in sand making production line
Next: The Influence Factors of Irregular Wear and Lower Efficiency
